室温ECAP和冷轧复合变形工业纯钛的组织和性能.pdfVIP

Vo1.22 No.3 第 22 卷第3 期 研 究 学 报 材 料 CHINESE JOURNAL OF MATERlALS R且SEARCH 2008 年 6 月 June2008 室温ECAP和冷轧复合变形工业纯钦的组织和性能* 付文点赵西成杨西荣兰新哲 (回安建筑科技大学冶金学院西安 710055) 楠. 采用 ECAP 技术和常规冷轧复合变形工艺制备了商强度工业纯钦，研究了复合变形后试样的力学位能与Jl微组织的关 系.结果表明，工业纯铁经室温单道次 ECAP 和冷轧复合变形后，品粒被严重拉伏，形成了明显的纤维状组织，试样的抗拉强度 高达 805 MPa; 随着冷轧变形绩的增大，变形组织的细化模度和均匀性提高，使试样的强度和塑住进一步提商.位错滑移和孪生 是工业纯铁蒙混 ECAP 和冷轧复俞变形的主要变形机制. 关键词 金属材料，巴CAP，冷轧，工业纯钦，纤维组织，力学性能 分吉拉号 TG146 文章编号 1005-3093(2008)03-0303卢04 Microstructure and properties of titanium processed by room-temperature ECAP and cold rolling FUWe时ie ZHAO Xicheng** YANG Xirong LAN Xinzhe (Scl恼。.1 01 Metallurgical 勘tgtneert饥g， Xran Un切ersit亩。， 1A陀hítectur宅 Techno协侧， Xi an 710055) * Supported by National Nature Science Foundation of China No.5043430 , Special Programs Foundation of Ministry of Education of Shaanxi Province No.07JK307 , and the National Nature Science Foundation of Shaanxi Province N队2005E105. Manuscript received July 6, 2007; in revised form February 9, 2008. ** To whom correspondence should be addressed, Tel:(029 E-mail: zha叫d@163.com ABSTRACT A two step process combining 叫川 channel ang阳r pressing (ECAP) and cold rolling (CR) has been developed to p肌ess commercial pure (CP) Ti. Mícrostructure and mechanical properties of as【deformed 丁i were investigated. Room-temperature ECAP and CR significantly elongated grains and the original microstructure for