石墨机加工车间的粉尘处理.pdfVIP

第5卷 第12期 2010 年 12 月 中国科技论文在线 SCIENCEPAPER ONLINE 979 石墨机加工车间的粉尘处理 李小川，胡亚非，吴晓冰 （中国矿业大学煤炭加工与高效洁净利用教育部重点实验室化工学院，江苏徐州，221008 ） 摘 要：在对石墨机加工车间产尘源进行测量和分析的基础上，提出抑制粉尘源扩散和粉尘集中处理的粉尘治理方 法，并自行设计了湿式除尘器和整套除尘系统。运行显示：系统除尘效率高达 98%~99% ，生产车间粉尘浓度降低 3 3 为 1.0~1.8 mg/m ，排气口粉尘浓度低于 1.1 mg/m ，除尘器压力损失650 Pa ，生产单件产品耗电量降低约36% ，年节 约水量约 11 000 t，大大降低了产品的生产成本，缓解了厂区的环境压力，为高粉尘加工行业粉尘治理提供了借鉴。 关键词：石墨加工；粉尘治理；粉尘源；湿式除尘器 中图分类号：X506, R135.2 文献标志码：A 文章编号：1673－7180(2010)12 －0979 －4 Dust removing for lathing process of graphite-produce Li Xiaochuan ，Hu Yafei ，Wu Xiaobing (Key Laboratory of Coal Processing and Efficient Utilization, Ministry of Education; College of Chemical Engineering and Technology , China University of Mining and Technology, Xuzhou Jiangsu , 221008, China) Abstract: On the basis of the measurement and analysis of the dust fountain of graphit-produce workshop, an effectual method in restraining dust from pervading and concentrated treated dust is put forward, with a sort of wet dust collector and a suit of dust removing system designed by ourselves. Application has indicated that the dust collection efficiency of this dust removing system reaches 98%-99% and pressure loss is 650 Pa only. The dust concentration of the workplace reduced to 3 3 1.0-1.8 mg/m and the dust content of discharged gas is 1.1mg/m . The power consumption for one manufacture had been reduced by about 36%, and about 11 000 t water would be saved per year, which would much reduced the producing cost and environment pressure. It helps to provide reference for the dust removing of high dust industry. Key words: graphit-produce ；dust removing ；dust fountain ；wet dust collector 粉尘污染是世界公害之一，在