高颈法兰轴心受拉试验与有限元分析.pdfVIP

学兔兔 第27卷 第2期 建筑科学与工程学报 Vo1．27 NO．2 2010年 6月 JournaI of Architectureand Civil Engineering June 2O10 文章编号：1673—2049(2010)02—0106—08 _-． L_- Ej 同 颈法兰轴心受拉试验与有限元分析 薛伟辰 ，付 凯 ，张克宝 ，傅鹏程 (1．同济大学 建筑工程系，上海 200092；2．华东电力设计院，上海 2O0063) 摘要：以练塘至泗泾500 kV送电线路钢管塔结构中采用的高颈法兰为试验对象，开展了4类不同 尺寸的12个高颈法兰的足尺模型静力试验和有限元参数分析；在试验和有限元参数分析结果的基 础上，提出了相应的构造建议。结果表明：高颈法兰的极限承载力均能达到设计荷载的 1．6倍以 上，高颈法兰有较高的安全储备；法兰板厚度和法兰颈高度对高颈法兰的承载能力影响较大，增大 法兰板的厚度和法兰颈的高度能提高法兰的整体刚度，有利于减小法兰板与法兰颈的应力；高颈法 兰在试验过程中具有较高的承载能力，结构在破坏前均有明显的预兆，具有较高的安全储备，可在 工程中推广应用。 关键词：钢管塔；高颈法兰；轴心受拉；静力试验；有限元分析 中图分类号：TU317 文献标志码：A ／ Axial Tensile Test and Finite Element Analysis on High—neck Flanges XUE Wei—chen ，FU Kai ，ZHANG Ke—bao。，FU Peng—cheng (1．Department of Building Engineering，Tongji University，Shanghai 200092，China； 2．East China Electric Power Design Institute，Shanghai 200063，China) Abstract：The high—neck flanges used in steel tube structures which were from Liantang to Sijing 500 kV transmission line in the power transmission towers were taken as the test obj ects．The static load test and finite element parametric analysis of 1 2 full——scale models of high—-neck flange which included 4 different sizes were carried out．Based on the test and finite element parametric analysis results，the corresponding construction proposals were put forward．The result shows that the ultimate carrying capacity of the high—neck flange is above 1．6 times of the design load and has an adequate safety reserve．The thic