莱钢鲁南矿业球磨大型化应用.pdfVIP

河南科技 • 创新驱动、 莱钢鲁南矿业球磨大型化应用 冯 培 顺 聂 鑫 张 玉 伟 (莱钢鲁南矿业公司 ，山东 临 沂 276400) 摘 要：莱钢鲁南矿业选矿厂一段闭路磨矿中采用了 1台MQY3660球磨机代替了原来4 台MQG2721小型球 磨机。该应用中，重点探索了给料浓度、球磨充填率、旋流器沉砂嘴对分选指标的影响以及球磨大型化前后 选矿成本的比较。结果表明，在平均给料粒级-12mm条件下，可以获得细度-200目占60%以上的旋流器溢流 产品，同时每年可降低选矿成本68.77万 关键词：大型化球磨;给料浓度; 充填率;沉砂嘴；降成本 中图分类号:TD453 文献标识码:A 文章编号：1003-5168(2016)04-0078-02 Application of Large-scale Ball Mill in Laigang Lunan Mining Company Feng Peishun Nie Xin Zhang Yuwei (Laigang Lunan Mining Company,Linyi Shandong 276400) Abstract: Laigang lunan mining company concentrator is adopted one MQY3660 ball mill instead of four MQG2721 small ball mills in a closed-circuit grinding. In this application , they mainly explored the im ­ pact of the feeding concentration, the ball mill filling rate,the hydrocyclone apex on the separation index, and the comparison of mineral processing cost in before and after the L arge-scale ball mill. The results showed that, at an average feed grade - 12 mm conditions, it could be obtained - 200 mesh that fineness of overflow products accounted for more than 60% of the hydrocyclone , at the same tim e they could re­ duce the processing cost 687700 each year. Keywords ：large-scale ball m ill;feeding concentration; [ling rate ; apex ; cost reduction 1 球磨设备及分选过程 性质、给料浓度、球磨充填率、返砂比和处理量等[2]。此 次主要从给料浓度、球磨充填率和旋流器沉砂直径即返 选矿厂通过优化改造，在一段球磨闭路磨矿中，采用 1台MQY3660球磨机代替原来4 台 MQG2721小型球磨 砂情况进行考察。此次实验确定初期处理量控制在