系杆拱桥典型架设方法的施工控制研究.pdfVIP

学兔兔 桥梁建设 2012年第42卷第1期(总第211期) 42 Bridge Construction，Vo1．42，No．1，2012(Totally No．211) 文章编号：1003～4722(2012)01—0042—06 系杆拱桥典型架设方法的施工控制研究 邢 云，赵荣欣，李 博 (上海市建筑科学研究院(集团)有限公司，上海200032) 摘 要：为了研究不同架设方法的系杆拱桥的施工控制问题，以2座采用不同方法施工的系 杆拱桥为背景，从施工方法的选择、控制原理分析以及成桥监控成果等方面进行研究比较。以成桥 理想状态为目标，从理论模拟关键工况入手，结合现场施工过程的控制，对先拱后梁和先梁后拱2 种施工方法的过程控制关键点进行对比分析。分析结果表明：要综合拱梁刚度分配特点和现场可 操作性来选择合适的施工方案；拱梁线形和吊杆内力的偏差控制是保障系杆拱成桥受力合理性的 目标节点，而不同的设计理念和施工方案决定了不同的控制侧重点。并基于现场控制过程对系杆 拱的施工细节给出了建议。 关键词：系杆拱；拱桥；施工监控；节点；线形 中图分类号：U448．225；U445。1 文献标志码：A Study of Construction Control of Tied Arch Bridges Constructed by Different Typical Erection Methods XINGYun，ZHAORong—xin，LIBo (Shanghai Building Science Research Institute(Group)Co．，Ltd．，Shanghai 200032，China) Abstract：To study the construction control of tied arch bridges constructed by different typi— cal erection methods，two tied arch bridges constructed by the different methods were cited as ex— amples and the selection of erection methods，analysis of control principles and monitoring results of the completed bridges of the tied arch bridges were studied and compared．By taking the ideal status of the completed bridges as the target，proceeding from the theoretic simulated critical load cases and also with reference to the construction process control in field，the critical points of the process control of two kinds of the construction methods of erecting the arches first and girders late and／or erecting the girders first and arch