水流量计算公式(国外英文资料).docVIP

水流量计算公式(国外英文资料) Water mechanics instruction Chapter 5 has a constant flow of pressure piping [basic requirements] To understand the basic characteristics of pressure pipe flow, and to understand the condition of tube flow in long tube flow and short tube flow. Master the hydraulic calculation of simple pipe and the drawing of the water head line, the total water head line, and the pressure distribution in the pipeline. Understand the characteristics and calculation methods of complex pipelines. [content feed and learning instructions] The previous chapter we discussed the basic theory of liquid movement, starting from this chapter will go into engineering hydraulics, is to use the basic equations of hydraulics (constant total flow continuity equation, energy equation and momentum equation) and head loss calculation formula, to solve the hydraulic problems in practical engineering. In this chapter, there is not much in the theory of the theory, mainly the simplification of the equation and the method of solving the problem, and the main emphasis is on the hydraulic calculation of the simple pipe. The main task of the calculation of hydraulic pressure is to determine the flow rate of flow through the pipeline. The water head H and the pipe diameter d are required to design the flow of the pipe. To determine the distribution of pressure p along the line by drawing the hydraulic pipe line of the line. 5.1 has the basic concept of pressure pipeline flow (1) simple pipes and complex pipes According to the composition of the pipes we divide it into simple pipes and complex pipes. A tube with no branching in diameter and constant roughness is called a simple pipe; A complex pipe is a pipe system consisting of two or more pipes. The complex pipe can be divided into series pipe, parallel pipe, branch pipe, flow tube and network. (2) short tubes and long tubes In the calculation of hydraulic pipe hydraulic calculation, the pressure pipe is divided into short tubes and long tub