第一节 概 述(国外英文资料).docVIP

第一节 概 述(国外英文资料) Section 1 An overview of the The contents and USES of the construction drawings Basic knowledge of reinforced concrete structure Concrete label and bar grade The name and function of the bar Protective layer Here is a way The dimensioning of the bar Common building structure member code ? An overview of the house structure: the building structure and the structure of the structure of the building. house structure diagram ? The contents and USES of the construction drawings content: the overall arrangement of the building structural component and the shape, size, material, structure and the design of each bearing component. It also reflects the requirements of other majors, such as construction, water supply, heating, electricity, etc. USES: mainly used as construction pay-off, digging groove, templates, binding of reinforced concrete is poured, set the embedded parts, concrete, install beam, slab, column, etc, as well as the basis for budgeting and construction organization plan. ? The contents and USES of the construction drawings Structure construction drawing ? Basic knowledge of reinforced concrete structures concrete: made from cement, gravel, sand and water. concrete label: different labeling of the strength of concrete. The common tags are C15, C20, C25, C30, C40, C60, etc. rebar grades: according to their strength and variety: The name and function of the bar: the different classification of the reinforcing bar in the component Force reinforcement: generally bear the pull of the component, called the tension. In beams and columns, there are also steel bars that need to be put under pressure, called compression. A steel bar that is used to hold the shear force or torque in the component, and is used for the position of the vertical bar, which is normally used in beams or columns. Frame: it forms the skeleton of the steel bar along with the stress tendon inside the beam. A: it forms the skeleton of the steel bar with the stress rein