l离心式风机检修(国外英文资料).docVIP

l离心式风机检修(国外英文资料) The maintenance of centrifugal ventilator (2009-11-09 21:54:15) is reproduced Label: talk Teaching objectives To understand the requirements and procedures of the centrifugal fan and axial fan, understand the technical standard of the fan, and understand the maintenance method of the fan parts. The teaching content The maintenance of centrifugal fan (1) inspection before repair The fan should be inspected at the operating condition before the repair, to understand the defects of the fan, and to record the data for the inspection Take an examination of. The main contents of the inspection are: (1) the vibration of bearings and motors and their temperature rise. (2) check the oil leakage of the bearing oil. If the fan adopts sliding bearing, the oil system and cooling system should be inspected and the quality of the oil. (3) check the tight tightness of the casing of the fan and flanged flanges. The external connection of the inlet baffle is good, the switch action is flexible. (4) to understand the relevant data in the operation of the fan and the efficiency test of the style machine when necessary. (2) the maintenance of the fan The repair of the impeller After the fan disintegrated, remove the soot and dirt from the impeller and carefully examine the wear and tear of the impeller, and the wear and tightening of the rivets Weld welding conditions, and pay attention to the impeller sealing ring and shell import into a solar or lunar halo presence of friction marks, because the minimum clearance here, when assembling malposition or fan operation, due to thermal expansion of friction will make here. For the local grinding of the impeller, the iron plate shall be covered with iron plate, and the thickness of the iron plate shall not exceed the thickness of the impeller, and the size shall be able to be worn Hole cover. For the rivet,If the riveting head wears away, it can be surfacing. If the rivet is loose, it should be replaced. The welds of the blad