京瓷KM1648一般故障代码及调整方法(国外英文资料).docVIP

京瓷KM1648一般故障代码及调整方法(国外英文资料) The entry mode isand exits the 001 copy key U000-output self-state report - U001 exit maintenance mode - U004 check machine number - U005 paperless - U019 display ROM version - U020 initializes all the data -- U021 initialization memory - U030 check motor work - U031 check the paper transfer switch - U032 check the clutch work - U034 sets the image print to the right place Adjust the front side of the front against the front side, 5.1/0/0/0/0/0/0 Adjust the midline - 1.2/0/0/0/0/0 U035 sets the folio dimension The length of 330 Width is 210 U051 adjusts the paper elasticon 20/0/70/80/0 U053 vernier motor speed Drive motor speed adjust 0 Multilateral motor speed adjustment 0 Out of paper motor speed adjust 0 The pair of roll motor speed adjust 0 Motor speed adjustment (used for paper feeding in paper plates) 0 Motor speed adjustment (for the paper box for the carton) 0 Motor speed adjustment (double sided mode) 0 The U060 regulates the input feature of the scanner 12 U061 open exposure lamp - U063 adjusts the shaded position 0 The U065 regulates the magnification of the scanner The main scan direction is 0 Subscan direction - 12 U066 adjusts the front-end to scan the original 10 on the glass U067 adjusts the center line to scan the original copy of the table glass U068 adjusts the scan location of the original manuscript in the transmitter U070 adjusts the transmitter magnification 0 The U071 adjusts the transmitter scan to the right place Adjust the front-end to 0 Adjust the back end to zero The U072 adjusts the transmitter center line 0U073 inspects the work of the scanner - The U074 adjusts the transmitter in brightness 1 U087 opens/closes the transmitter scan position mode 35 U088 sets the input filter (Mohr stripe reduction mode) U089 output mip-pg pattern - U091 check for shading - U092 automatic regulating scanner - U093 sets the exposure concentration level Text/text and picture/picture mode 0/0/0 U099 check for original