CAD应用技能(国外英文资料).docVIP

CAD使用技巧(国外英文资料) CAD usage technique, wang haitao was published on March 22, 2010 at 21:49 (19) (0) Category: personal journal report Draw and print scale control, apply the picture box, annotate the command In after the completion of the drawings, we will print drawings, print only when drawing (white figure or vegetable parchment blue-print), then he will think we drawing work finished basic file (and of course arrangement, etc.). When printing, there is a ring that is unavoidable, which is the scale problem. The printing proportion and the drawing ratio are reasonable, so the final drawing is clear and beautiful. We often see some drawings are so dense, some of them are empty, they are all part of the scale. So in terms of the ratio of print and the ratio of drawings, what should we pay attention to at the beginning of the drawing and the beginning of the drawing? Generally speaking, our final printed drawings have a ratio of two to one. In proportion, it is usually a construction plan; Not according to the proportion, there are a lot of general program text, process graph (yourself), conditions, figure, etc., in recent years, the text of the preliminary design () for design also gradually became not according to the proportion of printed in A3 size. Lets take a look at the scale printing. The diagram is basically a scale, but there is a different ratio set for the diagram. Vertical profile control, for example, are generally not 1:100, stairwells, toilet is 1:50, node details is 1:20, decorate the nodes in the graph details may be 1:10, the proportion of 1:5, 1:2, general layout of the commonly used ratio is 1:500,Sometimes there will be 1:00, 1:20, etc. Im going to illustrate this by using a set of conventional construction drawings, including a flat profile, stairway, bathroom, and a large sample. First, we draw the floor plan is usually at the beginning, then we should be in real per 1 mm corresponding to each standard unit 1 to draw in AUTOCAD, then other ve