土方回填施工方案2(国外英文资料).docVIP

土方回填施工方案2(国外英文资料) Land reclamation construction plan RSS printing copy links large medium small release time: 2011-09-1516:50:01 A brief introduction to engineering Second, the preparation before reclamation The confirmation of the packing This project is to be used as the main source of materials for the excavation of this project, and the engineers believe that the unqualified materials will not be used. Standard compaction test Turkmen back packing is determined, the project department inspector, sampling member invited supervision engineer in backfilling yard sample, extract soil samples should be representative of every soil layer and the properties of soil should be included. The soil sample is sampled and then sent to the construction site for the standard compaction test to determine the maximum dry density of the optimum moisture content. The optimum moisture content of soil backpacking was 16.8%, and the maximum drying density was 1.71 g/cm3. Technology according to the contract terms of backfill soil compaction D of 90% or more requirements, determine the minimum of the construction control of dry density of 1.71 g/cm3 x 90% = 1.54 g/cm3, check water content and dry density curve to determine the moisture content of dry density under the qualified range of 11% to 11%. 3, field crushing test Standard compaction test is completed, the roller compaction test is arranged in the construction site, roller compaction test: (1), the purpose of verification after compaction of soil material can meet the design pressure action density values; (2) to verify the performance of the compacted machine tools for the construction requirements; (3) to select reasonable construction compaction parameters: to spread the thickness of soil, to limit the size of grain size, to the suitable range of moisture content, to compacted and compacted the number of compacts; (4) to determine the technical requirements and testing methods for quality control. Rolling test in the calibra