生姜种植(国外英文资料).docVIP

生姜种植(国外英文资料) First, prepare and method before ginger. Pre-broadcast preparation: (1) break ginger: sprouting of ginger, ginger is bigger, although some ginger area has large break before sprouting, but still need to choose after budding, therefore, in the above that of the former to bye more ginger. The process of breaking ginger is essentially a process of selecting and selecting. Break on the general requirements when each ginger to keep only one short strong bud, a few ginger according to keep two strong sprout germ, the remaining germ removed, so that the nutrient concentration could supply main bud, ensure seedling full stand. If you find the base of the sprouts black or the Browning of the ginger block, it should be strictly removed. In addition to selecting the sprouts, you should consider the size of the ginger. After years of experiments, I have proved that it is advisable to have a block of about 75 grams. After snapping ginger also note that in order to facilitate management, according to kind of block size and germ strength grade, the small block and thin bud ginger piece together, fat ginger and ginger piece together with strong bud. When planting, the area is managed separately. (2) water bottom water: if the soil moisture is insufficient, it will affect the excavation and growth of the buds. In order to ensure that the buds are excavated, the water should be poured before seeding. Water bottom water is commonly in the gutter when fertilizing, after planting 1 ~ 2 hours, the water quantity should not be too big, otherwise the gingerbed is wet, inconvenient ground operation. The sowing method: When the bottom water seeps, it is ready to put the ginger in the ditch. The method that puts ginger, each jiang area also is not consistent. One is the horizontal seeding method, which is placed in the gutter, keeping the seedling direction consistent. If east and west go to the ditch, the ginger shoots will be all south; North and south, the buds will be all we