STM8的ADC工作原理.pdf

STM8 family microcontrollers include an Analog to Digital Converter of the switched- 1 STM8 ADC internal hardware capacitor type. This ADC type uses the SAR (Successive Approximation Register) principle, by which the conversion is performed in several steps. The number of conversion steps is equal to the number of bits in the ADC converter. STM8 family microcontrollers include an Analog to Digital Converter of the switched- STM8ADC capacitor type. This ADC type uses the SAR (Successive Approximation Register) principle, ST Application note AN2719 STM8ADC by which the conversion is performed in several steps. The number of conversion steps is Charge-RedistributionCR ADCADC equal to the number of bits in the ADC converter. CR ADC Figure 1 to Figure 6 show the first conversion steps. 1.1 SAR principle Figure 1. Basic schematic of switched-capacitor ADC Figure 1 to Figure 6 show the first conversion steps. Vref Vin Sa Figure 1. Basic schematic of switched-capacitor ADC Vref Vin Sa S1 S2 S3 S4 S5 S6 S7 S8 S9 C C/2 C/4 C/8 C/16 C/32 C/64 C/128 C/128 A D PR Q ADCdata Sb S