ECTE301-Lab-Notes-ZZU2010郑州大学外教课件.pdfVIP

School Of Electrical, Computer Telecommunications Engineering UOW ECTE301 Laboratory Notes for ZZU 2010 Version: ZZU 2010 This publication is copyright. The contents of this publication are strictly for the use of UOW, and should not be transmitted externally, unless otherwise authorised in writing. Copyright © UOW Document Owner: Christian Ritz, SECTE Author: Abdesselam Bouzerdoum, Christian Ritz Approved By: Approval Date: Document Control: Version Date Author Reason 1.0 08/07/08 Abdesselam First Version of document Bouzerdoum, Christian Ritz Table of Contents Introduction Assessment Resources Laboratory Notebooks Lab No. 1 Lab No. 2 Lab No. 3 Lab No. 4 Introduction The aim of ECTE301 Laboratory sessions is to introduce students to signal processing algorithms and techniques using the software package MATLAB and its Signal and Image Processing toolboxes. Students are expected to develop a practical insight into signal processing algorithms and acquire the necessary skills to manipulate and process signals to build useful applications. Assessment Demonstrator’s Verification Sheets The demonstrator’s verification sheet must be signed and dated by the demonstrator upon following presentation of the laboratory notebook. A sample demonstrator verification sheet is provided in Appendix A. At the end of your last laboratory class you should hand these into the demonstrator. Laboratory Reports For the laboratory report component, students are required to submit a report covering the practicals. The report shou