ZD6-D转辙机备课(国外英文资料).docVIP

ZD6-D转辙机备课(国外英文资料) ZD6 electric switch machine handouts The principle of ZD6-D switch machine: ZD6 switch machine is a DC electric energy into the mechanical energy to push the rail switching device, the locking switch, the motor adopts a DC series excitation reversible motor, switch control using four wire switch, divided into start-up circuit and a switch indicating circuit, the starting circuit makes the electric switch for motor conversion switch, said circuit will switch position after conversion to reflect the signal tower, and gives the same site location representation (i.e., reverse), provide the conditions for the interlocking. Switch start control has two kinds, one is route type switch control, to make the switch according to each route request will route switch to locate or reverse position; two is the independent operation of turnout, turnout, etc. in order to repair the experimental, the need for separate manipulation of turnout. The composition of machine by the motor to see, a DC motor, speed reducer, friction coupling, start, automatic opening and closing device, main shaft, gear, rack block action etc., all parts: DC electrical energy into mechanical energy; the speed reducer is the high speed motor in reducing friction; the switch is coupling is not in place when rotating to increase friction; start plate drives the checking column in the turnout at startup; automatic shutter is in place after the start, the conversion switch connected to the corresponding position; main shaft, gear, rack block with the vertical movement into the lateral force to drive switch. In addition to type ZD6-D, the E, F, J, G and other structures used in the field are approximately the same. ZD6-D switch machine standardization overhaul: according to the group issued standardized maintenance operation, in which the adjustment of friction current is generally adjusted according to season, winter lower limit, summer upper limit, etc.. Debugging and testing Turnout debuggi