RFID应用方仿真(国外英语资料).doc

RFID应用方仿真(国外英语资料) 2 system structure and process design 2.1 system framework As shown in Figure 1, the system mainly by the user interface module, data processing module, virtual device module and RFID test database and local database is composed of five parts, the interface between them independent, mutual coordination, information sharing. In this architecture, the user interface module is responsible for the systems user interface, display interface controls, deployment effect and dynamic simulation animation, the user according to the specific RFID application scenarios and business needs of custom deployment system, configuration interface called virtual device module of virtual device properties and configuration parameters for the user to modify the parameters used. Are from the RFID test database download. The virtual equipment module for unified management of the virtual simulation system and virtual tag reader, all raw data generated during the operation of the real-time receiving the relevant calculation, the calculation results will be submitted to the data processing module two data processing (such as business rules, the event triggering) all data stored in the local database, at the same time some of the data is returned to the user interface module. Need to mention here is that the device driver module, the module used RFID unified package equipment manufacturers drive and provide EPC in accordance with Global reader standard interface, the purpose is to some of the key nodes in [6] simulation system was corrected when necessary to connect RFID physical equipment, the overall simulation results more accurate and reliable. The RFID test database as the system data source real-time update, it can be stored in the server database, it can be stored in the local database, for the simulation system to download and call the relevant data, the program code to access the database through JDBC technology. Figure 1 RFID deployment simulation system architectur