影响立磨产质量的因素(国外英文资料).docVIP

影响立磨产质量的因素(国外英文资料) Factors affecting the quality of the vertical mill? The introduction ? ? My company in 2004 completed and put into operation a annual capacity of ten thousand tons of cement production line, l00 use from Germany company LM56.2 + 2 c/S roller roller mill grinding of slag and clinker, respectively, using experience for many years now, talk about the influencing factors on the quality of the roller mill to produce, to discuss with you. 2? Factors that affect the quality of the ground grinding ? ? (1) the influence of the material feed rate of stability is the key to affect the normal operation of vertical mill, grinding slag superfine powder, in particular, feeding non-uniformity produces vibration grinding can lead to material bed, the temperature is not good control; The amount of air and the pressure of negative pressure can also affect the control of the hot blast furnace, which may cause the heat blast furnace to coking and suspend production. Secondly, the amount of iron in the material can also affect the quality of the grinding. With the increase of grinding time and grinding machine memory product fine iron particles, not only affect the mill grinding efficiency, increase the wear roller shell and mill, under the same conditions will also reduce the finished product of the specific surface area. And coarse particle in the material of iron, large pieces of iron more or material chunks of conveyor belt and other sundry, also can cause impeller feeder card dead stop grinding, even into the mill, will increase the vibration of vertical mill, so that cant control cause downtime, seriously affect the normal operation of the mill. The material is required to stabilize the material and to remove iron from the material. Grinding clinker, because the physical properties of clinker is different, the operation of the uniform or not opposing grinding feed capacity is not have too big effect, of course also cannot too big difference (vertical mill grindi