长距离中压管线吹扫(国外英文资料).docVIP

长距离中压管线吹扫(国外英文资料) Industrial technology QILU petrochemical QILU PETRO workers CH, 2E0M0IC5A, L3 3T (I1 / X) 3H: N2O9L ~ C ~ 3 Y1 Long distance medium pressure steam pipeline blowing technology to discuss Zhang Jimei (sinopec Zulu, shandong zibo, 2554o8) The method of blowing and scavenging steam pipeline was developed through the analysis of the basic principle of the steam pipeline and the calculation of the technical parameters. This paper expounds the actual problems encountered during the purge and the reason analysis, and puts forward some Suggestions for improvement. The theoretical and practical methods of blowing and scavenging steam pipeline are deepened To know. It is of reference to improve pipeline design, construction, supervision, acceptance and the same kind of pipe sweep. T long steam pipeline purge technique Middle circle classification number: TQ055.8 document identification code: B article number: 1009-9859 (2oo5) O1-0029 o3 In order to excavate the potential of coal oil, it is to reduce the effect In the second phase of the project, three steam were constructed The pipeline is fed by the thermal power plant to the ethylene device, one of which is in the pipe Steam piping to the device to transport industry to steam. For the high Effect, high quality finish line purging, meet industrial turbine test And the requirements of the safe economic operation, the purge technique of the medium pressure steam line The operation parameters and related matters were analyzed and studied, and the implementation was made and implemented The purge plan was a complete success. Pipeline design parameters The pipeline initial supply is 160t/h, pressure 4.3 MPa, Temperature 430 C, end pressure 3.9 MPa, temperature 39012, full length 5.2 km, DN559mm diameter. Calculation of the technical parameters of the purge Principle of 2.1 The steam line scavenging, in effect, USES steam as motion Force, blow the inside of the pipe, make it out of the pipe. Whether the clutter ca