AutoCAD 2002 完全使用手册(DOC) ch16_ok（国外英文资料）.doc

AutoCAD 2002 完全使用手册(DOC) ch16_ok（国外英文资料） Chapter 16 real life orders Partial opening and local loading Open the command at 16.1.1 The local open command allows the user to handle only a certain part of the figure, loading only the geometry of the specified view or layer. If the graphics file is locally opened, the specified geometry and named objects will be loaded into the graphical file. Naming objects include: Block (Block), the Layer (Layer), mark Style (Dimension Style), linear (Linetype), distribution (Layout), Text Style, Text Style), viewport configuration (Viewports), the user coordinate system (UCS) and the View (View), etc. The invocation of this command is the same as the open command. In the Select the File (Select File) dialog box, users need to Open the specified graphics File, click on the button on the right side of the button pop-up menu, Select the Partial Open Open (local) or Partial Open the Read - Only (local Open read-only) item, system will pop up further Partial Open Open (local) dialog box, as shown in figure 16-1. Figure 16-1 Partial Open dialog In the dialog box, the View geometry to the load (to load the geometry of the View) column shows the selected View and graphics are available in the View, the default View is Extents (range). The user can select a view to load in the list. Note that only the model space view is loaded. To load the geometry of the drawing space, it is necessary to implement the layout of the drawing space geometry. In the Layer geometry to load (Layer for loading the geometry), all the valid layers in the selected graphic file are displayed. The user can select one or more layers to load, geometry will be loaded on the selected layer to the graphics, including model space and paper space geometry. The user can click the button to select all the layers, or click the button to cancel all options. If the user selects Unload all Xrefs on open (uninstall all external references when open), the external reference is not i