TSM单驱动器磁带回收测试记录（国外英文资料）.doc

TSM单驱动器磁带回收测试记录（国外英文资料） TSM single-drive tape recovery test record The test environment: Win 2003 + TSM server 5.3.2 Centos 4.4 + TSM client 5.3.0 The HP Dat 40 tape recorders HP DDS4 tape Test description: Install the server side of TSM in win2003. Centos4.4 Install the client side. Define a DISK storage pool diskpool on the server side, a tape storage pool testpool, and then duplicate the backup on the client side Larger files make a disk usage 100 percent. Then define a disk storage pool, huishoupool, to set the collection pool for testpool to Huishoupool, set the nextpool of huishoupool to testpool. After the setup is complete, use q vol tapename f = d to view the tape details. There is a Pct. Reclaimable. Space: identifies how many recoverable Spaces are available for this tape, before which you can use exp The in command starts the overdue process, which is to let TSM determine that the backup version has expired, can be removed from the tape, and exits the space occupied. Check after recycled space, if more than 60%, and set up recycling pool. Then the TSM will automatically start recycling, if there is no set recycling pool, TSM will not start the recovery process. If less than recycled space 60%, but there is a need for recycling, but you can manually upd storage pool, by looking at the Pct. Reclaimable of the q STG stgpoolname f = d Space: option to see if the changes are successful. When recycled space than has a tape after reaching this tape storage pool Settings, TSM started recycling process, this process without human intervention, but need to pay attention to the console (dsmadmc - con) the messages in the prompt, timely in accordance with the requirements of inserting tape or something like that. After the recovery process, through q vol command to see a recovery results. And need to upd STG huishoupool high-value detainee interrogation group (hig) = 00 low = 00 command to recycle data migration testpool back in the pool, completed, can delete the r