VCORE电压工作原理（国外英文资料）.doc

VCORE电压工作原理（国外英文资料） A VCORE voltage overview VCORE voltage is the voltage that is provided to the CPU, which is mainly divided into two types of 1) linear voltage modulation 2) PWM modulation (also known as pulse width modulation). Usually VCORE voltage is passed The second method modulation, this is because the PWM voltage modulation method is used for the CPU power supply has the following advantages: 1) due to the CPU of work demands great current, PWM modulation has a strong high current load capacity. 2) CPU working current not only make the CPU itself produces a large quantity of heat, and that is responsible for the heat generated by the power transistors are also to be reckoned with, large working temperature will affect the quality of power supply. PWM voltage modulation may be powered by 3 or 4 phase method, equivalent to the average load distribution, make whole the calorific value of the power supply line to drop, VCORE voltage stability are obtained by the. 3) PWM voltage modulation can easily adjust the output voltage, so the user can adjust according to need, for example, usually slightly increase voltage can improve the stability of CPU overclocking operation. The principle of the second pulse width modulation 1, basic device and single phase PWM modulation MOS tube: voltage control current component, through the control of GATE pole voltage to control the other extreme current size of the pipe. The image below is NPN enhanced MOS tube, which is the equivalent of a short circuit (D) when the G pole voltage is greater than a certain opening voltage D voltage is equal to S point voltage. When the G pole voltage is less than the open voltage S The connection between two and D is disconnected. You can imagine that theres a passage between S G to control the switch. This is the most common of the MOS tube switch control The interpretation of the vulgar. In addition, the current will be between S and D as the G pole voltage increases G increases this is th