全面了解红外遥控(中文版)（国外英文资料）.doc

全面了解红外遥控(中文版)（国外英文资料） A comprehensive understanding of the infrared remote control the author PS  this article translated by baidu net friend xuexi51  I arrange  are for reference only IR (infrared) remote control is the cheapest way to use remote control in the visual range by infrared. Almost all video and audio devices are available now Remote control. Because the technology is applied widely  corresponding application devices are cheap  so infrared remote control is the ideal of our daily equipment control Way. Knowledge of this part will explain the principle of infrared remote  and some consumer appliances we use daily to infrared control protocol. Infrared light is actually a normal light of a particular color. We cant see this particular color because the wavelength is greater than that Under 950 nm  is located in the visible spectrum. This is our one of the purpose of using infrared remote control  we want to use it  but we dont want to see To it. Another reason is  infrared LED light-emitting diodes  is very easy to make  production cost is very low. Although we cant see the infra-red light emitted from the remote  but doesnt mean we cant make it visible. As shown in figure  through camera And digital camera  we can see infrared light. Is to our disadvantage  infrared light source is really too much. The sun is one of the strongest light source  other have such as  white On lamp, candle, thermal system center  such as heat dissipation device   and even our bodies. Actually   as long as there is hot object emits infrared light. So  we need to pay attention to ensure our infrared remote transmission of accurate information on the transmitter to the receiver. Modulation is the difference between the signals we need and the noise. By modulation we can shine the infrared light at a particular frequency. The infrared receiving Will fit the frequency  other noise signal will be ignored. You can think this method of flicker is receiver no