简单方法挑选表面喷涂色彩开关（国外英文资料）.doc

简单方法挑选表面喷涂色彩开关（国外英文资料） Ordinary switch socket is white, and the color switch that manufacturer introduces, have two kinds of production method commonly. One is the use of colored PC raw materials, which will not fade for a long time. However, due to the large restriction of raw materials and injection molding process, The finished product will show more obvious solution marks, and different batches may also appear in color difference. In addition, color PC raw material choice face is small, metallic color, more deep face Colors are difficult to implement right now. Another is painted color, and the white product comes out and is sprayed on the surface. The advantage of this approach is that almost all colors can be achieved. Lack of The point is that the spray effect is very different, the paint quality control better product color is even, the long term use is not faded; Small and medium manufacturers spray product, surface particle Uneven, with a long time, the area of the touch is white. Different spraying quality is strictly controlled by different manufacturing process and quality control The cost difference is enormous. In practical choice, there is a simple way to evaluate the quality of the paint. Take a blank sheet of paper and draw a corner of the paint on a piece of paper It is. The quality products leave a very light color and no white on the corner of the switch. The product of poor quality leaves a clear stain on the white paper The corner of the room is directly exposed to the white. How do I select the switch socket 1, see the appearance The style of switch, class should match the integral style of indoor. White switch is mainstream, the integral tone that decorates in most bedroom is light color, In most cases, black, brown and other dark switches should not be used. 2, by feel Good quality switches are made of advanced engineering plastics such as bulletproof glue (PC), fire retardant, moisture-proof performance, anti-impact performance, and anti-p