汇编语言的符号表示（国外英文资料）.doc

汇编语言的符号表示（国外英文资料） The -si is the source index register, which is used to store the offset address of the source operands, and the contents of the SI are automatically modified, which is called the source index register. The -di is the destination register, which is used to hold the offset address of the target operand, and the content of DI has the function of automatic modification, which is called the destination index register. The -ax is called the accumulator, which is used to store operands in arithmetic logic operations, and all the I/O instructions use the accumulator and peripherals to transmit information -bx is called the base address register, which is commonly used to store access to the base site inside, The -cx is called the counting register and is used as a counter in the loop and string operation instructions The -dx is called the data register, which holds the address of the I/O port in the I/O instruction in a register indirect addressing In addition, the DX is combined with AX to hold a double word length (32 bits), with the DX storing 16 bits and the AX in the lower 16 bits. CX DX AX, BX Data in a general-purpose registers inside the CPU registers, data registers are used for storing involved in the operations of data or operations as a result, every data register is 16 bits (16 bits), but can be high, low 8 respectively used as two separate 8-bit register. Their high eight remember AH, BH, CH, DH, low 8 bits for AL, BL, CL, DL. The use of the flexible approach to programming bring great convenience, can deal with 16 bits of data, also can deal with 8 bits of data. -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --