Archlinux安装笔记（国外英文资料）.doc

Archlinux安装笔记（国外英文资料） Simple notes Download the installation Arch ISO and guide the installation media Guide the installation media Enter the BIOS to modify the boot sequence, tune the installation medium to the first boot sequence, save the Settings and restart. The way in which the BIOS is entered is known: press [Delete], [F1], [F2], [F2], [F12], [F12] keys]. Use the boot menu to boot the installation media. The boot menu mode is known to be: press the [Esc], [F8], [F9] key or [F12] key. Show the Boot interface, select Boot Arch Linux and return the car. Check whether UEFI mode is enabled -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- !!!!!!!!! Whether the mainboard supports the UEFI and the UEFI mode will affect the installation. # mount - t efivarfs/sys/firmware/efi/efivars # is ignored if mounted # efivar l. If Arch Linux starts with the UEFI mode, the efivar will correctly list the UEFI variable Configure the installation environment Build a network connection # DHCPCD or wifi - menu (wireless) Select the software source for pacman The nano/etc/pacman. D/mirrorlist, put the source of China in the front Three partitions 1, use cfdisk partition Create a file system, create and activate swap partitions (mkswap, swapon) Four system installation Mount new partitions Install the basic system # pac-i/MNT base 3, to generate fstab # genfstab - u-p/MNT / MNT /etc/fstab 4, check whether fstab is correct Reference check item: For the last part of each line pass , / partition should be 1 and the other partitions 2. The BTRFS partition (whether or not/partitions) and swap partitions should be 0. If the error is found, correct the fstab and do not do genfstab again. 5 configure the basic system Enter the new system # arch - chroot/MNT/bin/bash 2, the Local Edit /etc/local.gen to remove the # # nan