圆锥管螺纹过盈联接螺纹牙应力和变形计算方法.pdfVIP

DOI :10.1413 /ki .1006 -3080.2010.03.01 ( ) Vol.36 No.3 4 2 　　　　　　Journal of East China University of Science and Technology (Natural Science Edition) 2010-06 　　:1006-3080 (2010)03-04 2-06 1 1 2 1 1 李　强 , 　陈守俊 , 　张　毅, 　王建文 , 　安　琦 (1.华东理工大学机械与动力工程学院, 上海200237; 2.无锡西姆 斯石油专用管制造有限公司, 江苏 无锡 214028) 　　:以圆锥管螺纹为研究对象,在弹性力学的基础上,结合组合厚壁圆筒理论, 对圆锥管螺纹 齿面过盈配合进行了理论分析,建立了一种新的解析模型, 得到了圆锥管螺纹接触齿面上的径向接 触应力和变形公式。并以API-P110S Υ88.9 mm 圆锥套管螺纹为例, 对螺纹牙的径向变形和径向应 力进行了实例计算和有限元分析,通过将解析计算结果与有限元计算结果进行比较分析,证明所建立 的计算模型具有较好的准确性, 为精确计算圆锥管螺纹过盈联接的应力、变形提供了一种新的 方法。 :圆锥管螺纹;径向应力;径向变形;有限元分析 :131.3 :A Calculation Method of Stress and Deformation of Interference Fit Conic Thread Connection 1 1 2 1 1 L I Qiang , 　CH E N Shou-j un , 　Z HA N G Y i , 　WAN G J ian-wen , 　AN Qi (1.School of Mechanical and Power Eng ineering , Ea t China Univer ity of S cience and Technology , Shanghai 200237, China; 2.Wux i Seamle Oil P ipe Co ., L td, Wux i 214028, J iang u, China) Abstract:Based on elasticity, the radial stress distribution and deformation on the teeth w ere studied for the conic thread connection w ith interference by thick-cylinder theory, and a new calculation model w as established through the theoretical analysis.A calculating example for API-P110S Υ88.9 mm oil tube indicates that this method is practicable.Compared w ith the result obtained by the finite element analysis, the model estabilished has high accuracy.The model deprived in this paper offers a new w ay for the calculation of stress and deformation of the conic thread connection.