基于Processing的生物反馈系统设计和实现.pdf

Computer Science and Application 计算机科学与应用, 2016, 6(5), 271-277 Published Online May 2016 in Hans. /journal/csa /10.12677/csa.2016.65033 Design and Implementation of a Biological Feedback System Based on Processing Jinquan Zheng, Zhuxin Li, Yiyang Zhao, Zhiyu Cao, Bei Wang Department of Automation, School of Information Science and Engineering, East China University of Science and Technology, Shanghai st nd th Received: May 1 , 2016; accepted: May 22 , 2016; published: May 25 , 2016 Copyright © 2016 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Abstract Biofeedback technology is the feedback of the human physiological and psychological information to the subjects. According to the feedback information, the subjects can carry out self-training. The photoelectric pulse sensor gathers pulse signal, and the signal will be filtered and amplified, which inputs the Arduino controller for A/D conversion and data processing. The signal will be trans- mitted to the PC using Bluetooth serial HC06. The signal shows in the Processing which can feed- back the results to subjects, reaching the biofeedback therapy. Keywords Arduino, Bluetooth, Processing, Biological Feedback 基于Processing的生物反馈系统设计与实现 郑锦泉，李竹心，赵熠阳，曹志宇，王 蓓 华东理工大学信息科学与工程学院自动化系，上海 收稿日期：2016年5月1 日；录用日期：2016年5月22 日；发布日期：2016年5月25 日 摘 要 生物反馈技术是将人的生理心理信息反馈给受试者，受试者可以根据反馈信息自我训练的技术。本文利 文章引用: 郑锦泉, 李竹心, 赵熠阳, 曹志宇, 王蓓. 基于 Processing 的生物反馈系统设计与实现[J]. 计算机科学与应 用, 2016, 6(5): 271-277. /10.12677/csa.2016.65033 郑锦泉 等 用光电式脉搏传感器采集脉搏信号，经过滤波和放大，将模拟量信号输入控制器Arduino进行A/D转换 和数据处理，利用蓝牙串口HC06将信号传输至PC端Processin