发念头滑腻不良(化油器式)1(国外英文资料).docVIP

发动机润滑不良(化油器式)1(国外英文资料) Engine lubrication (carburetor type)? ? The engine lubricants are common failures, such as low oil pressure, high oil pressure, abnormal oil quality and excessive oil consumption. ? ? ? A: the oil pressure is too low? ? Failure phenomenon: the engine oil pressure gauge reading is always below the standard value at normal temperature and speed. Causes of failure: low oil pressure, lubricated system, and non-lubricants. (1) the oil of oil is too low, the viscosity is too small or spoiled, mixed in the gasoline, the coolant etc. (2) the oil pressure instructions are wrong. Such as oil pressure gauge, sensor, oil pressure switch, oil pressure indicator lamp, oil pressure alarm failure, etc. (3) oil spill, oil spill, oil spill, oil pipe, oil spill, plugging, etc. (4) the oil pump is not working well, and the oil pump is clogged with oil. (5) adjustment of the oil pressure valve is not properly adjusted, or stuck, or the pressure valve spring is soft and broken. (6) the oil filter, the filter, the sealing liner can damage the oil leak, and the bypass valve is blocked. (7) the shaft neck and neck of the engine are too large, and the bearing cover is loose, causing too much oil and the oil pressure is too low. Fault diagnosis (1) test car, use the oil pressure gauge, alarm lamp or alarm to be diagnosed. (2) inspect oil, oil, oil and oil. (3) to separate the oil pressure indicating system and the lubrication oil road failure. (4) check the filter core of the oil filter, whether the bypass valve is plugged, and the oil filter is leaking oil. (5) check and adjust the external loading pressure valve. (6) the inspection machine oil pump, inspecting the end clearance of gear, the radial clearance and the meshing space between the gears, and the oil pressure, pump oil quantity and other performance test. Check the main bearing of crankshaft and connecting rod bearing and camshaft bearing etc. ? ? ? ? ? Two, the oil pressure is too high? ? Failure phenomenon