长安大学渭水校区综合办公楼设计 - 西安建筑科技大学.doc

长安大学渭水校区综合办公楼设计 学生姓名：王 茹 指导老师：李晓文 （土木工程学院 土木工程专业） [摘要] 本办公楼位于西安市草滩渭水园东南，总建筑面积14300平方米，主体结构11层，无地下室，建筑高度41.7米；采用框架—剪力墙结构，抗震设防烈度8度，抗震等级：剪力墙一级，框架二级；采用桩基础。本设计包括建筑设计、结构设计和基础设计三部分内容。建筑设计包括：总平面布置，平立剖面设计，构造设计，防火设计；结构设计主要包括：结构布置，截面选择，计算简图的确定，刚度的计算，重力荷载及水平地震作用计算，水平地震作用下结构的侧移验算及内力分析，竖向荷载作用下框架、剪力墙内力分析，作用效应组合和构件的截面设计；基础设计包括：桩型、桩径的选择，承台平面尺寸的确定，单桩承载力的计算，承台的抗冲切验算、受剪承载力验算、受弯承载力及配筋计算。 [关键词] 毕业设计；框架—剪力墙结构；抗震设计；桩基础 [Abstract] This office building locates in the southeast of Xi′an CaoTan River Park, 14,300 square meters of the construction area, 11 floors of the main structure, no basement, and the total height is 41.7 meters, using pile foundation; It is adopted the framework and shear-wall structure, with the earthquake-proof intensity of 8 degrees, and the earthquake-proof grade of each component as follows: shear-wall 1, the framework 2. The design insists of three parts: architectural design, structural design and foundation design. Architectural design including: total horizontal layout ,horizontal, graphic and profile design, fire protection design; Major structural design including: the structure layout, cross-section choice, calculation sketch selection, rigidity calculation, the internal force calculation under gravity load and horizontal seismic load, the structural side displacement calculation under the horizontal seismic load, the internal force analysis of framework and shear-wall under the vertical load, the combination of internal force and the cross-sectional design of components. Foundation design including: the choice of the pile type and pile diameter, the determination of support-base size, capacity calculation of anti-pile, the calculation of support-base shear capacity, the calculation of support-base bending capacity and reinforcements. [Key words] graduation design，framework and shear-wall structure，resist seismic design，pile foundation 1 工程概况 本办公楼位于西安市草滩渭水园东南，总建筑面积14300平方米，主体结构11层，无地下室，建筑高度41.7米。底层层高3.9米，标准层层高3.6米。 2 建筑设计 2.1 总平面设计 根据西安市主