东汽60W机组EH供油系统介绍(国外英语资料).doc

东汽60W机组EH供油系统介绍 oil supply system The fuel supply system provides a high pressure work oil (11.2MPa) for regulating the implementation of the security system. The utility model is mainly composed of a high-pressure device (including a regeneration device, an accumulator), an oil filter assembly and a corresponding oil pipeline system, as shown in Fig. 0-5-1. 1.1 working principle of oil supply device By AC motor driven high pressure piston pump, through the filter by the pump in the tank will be anti fuel oil from the pump suction, the export of oil through the oil filter pressure into the high-pressure accumulator and the high-pressure oil accumulator connecting pipe, the high pressure oil to the actuator and high pressure system. The pressure relief valve tube was 14 + 0.2MPa action in high voltage to kerogen, over-voltage protection function. The oil return of the actuator passes through the pressure return pipe first through the oil filter and then back to the tank. High pressure pipe on the pressure switch PSC4 to hydraulic deviation from the normal when the alarm signal and switch signal provides automatic start standby pump, pressure switch, PSC1, PSC2, PSC3 can send interrupt stop signal (three out of two logic). The pump outlet pressure switches PSC5, PSC6 and 20YV, 21YV are used for the main oil pump linkage test. The fuel tank is equipped with a temperature switch and a liquid level switch, which is used for the oil tank with high oil temperature and oil level alarm and the interlock control of the heater and the pump. The oil level indicator is positioned on the side of the tank. One point two Introduction of oil supply unit and main components Power requirements for oil supply installations: Two main oil pumps for 2 x 45KW, 380VAC, 50HZ, three-phase Two circulating pumps are 1.5KW, 380VAC, 50HZ, three-phase A group of electric heaters 3KW * 2220VAC, 50HZ, single phase 1.2.1 oil pump Two EHC pumps are pressure compensated variable displacement pumps. Wh