印品视觉性与墨层(国外英语资料).doc

印品视觉性与墨层 The uniformity of the ink layer of the printed matter directly reflects the quality of the product. Especially the multi-color printing packaging decoration products, is the use of a large area layout as substrate, the printing ink amount is large, if not a good grasp of technology, it is difficult to print ink layer smooth and uniform, it is not up to the ideal effect. A high-quality color printing products, the appearance should give people a visual sense of beauty. This sense of beauty begins with the brightness and uniformity of printed inks. Some operators because the process is lack of practical experience, in order to overcome the layout of ink layer is uneven, flooding, often blindly increase the inking to satisfy the demand of printing ink and a thick layer of bright visual effect, so that the printing ink layer bottom, imprinted ink film crystallization is not strong and other adverse consequences, which is the process of operation a technical error, must pay attention. The following several cases of ink layer flooding analysis: A printing, paper sizing degree is not balanced, the layout of the ink layer paper smoothness caused by flooding The practice shows that the paper is coarse and attracts large amount of ink. When the surface of the printing surface is poor. The layout of ink layer is prone to flooding. This is because the paper fiber interwoven to produce a certain gap, not well covered by coating evenly. In this way, printing ink layer paper and printing plate surface contact between the bad shape, in this case, if that is the layout of ink supply insufficient blindly increase the inking amount, is bound to produce printing stick dirty fault, is not desirable. But by increasing the printing pressure. The paper smoothness and bad layout ink layer between the uniform and sufficient conditions of the contact, so as to achieve better to eliminate the printing ink layer layout floating phenomenon, to ensure that the printing ink layer is unif