灭火方法及灭火器的应用(国外英语资料).docVIP

灭火方法及灭火器的使用 Fire extinguishing methods and the use of fire extinguishers.Txt How to use a fire extinguisher Foam extinguisher Method of use: the lifting ring of the upper part of the cylinder can be carried quickly to the fire site. At this time, attention should be paid not to make the fire extinguisher too tilted, not to cross or upside down, so as to avoid mixing two drugs in advance. When the ignition distance of about 10 meters, you can connect the cylinder upside down, a hand grip ring, bottom ring on one hand on the barrel, the jet combustion at. To extinguish combustible liquid fire, as has been flowing like combustion, it will bubble youyuanerjin injection, the foam completely covered the burning surface; such as the burning of the container, the inner wall of the container should be at the bubble, the bubble flowing along the inner wall surface, gradually covering fire. Not directly at the liquid injection, so as to avoid the impact of the jet, but will break up or out of the burning liquid container, expand the scope of combustion. In fighting solid material fires, the jet should be directed at the most violent place. As the effective injection distance is shortened, the user shall gradually approach the combustion zone and begin to spray the foam on the burning material until it is extinguished. When used, the fire extinguisher should always remain in an inverted state, otherwise it will break the jet. Dry powder fire extinguisher When the fire, portable fire extinguishers or shoulder quickly rushed to the scene, at a distance of 5 meters down burning, fire extinguisher. If the dry powder extinguisher is used for external storage, the operator shall hold the spray gun in one hand and lift the lifting ring on the other hand. If the opening of the gas bottle is hand wheel type, it is turned counterclockwise and rotated to its highest position, and then a fire extinguisher is brought up. When the dry powder is ejected, fire rapidly at the root of the flame