金属加工削加工液(国外英语资料).docVIP

金属加工削加工液 Metalworking fluid 1, no water soluble cutting solution category (ISO) product name and code name, apparent viscosity (mm2/s40 DEG C), flash point (DEG C), maximum non biting load, use and characteristics MHA HDH electrical discharge machining oil, colorless transparent oil 2. 0~2. 4 = 105 - better antioxidant properties, aromatic content close to zero DH-1 EDM oil 1.8-2.8 = 95 - suitable for precision or small electric machine DH-2 EDM oil 3.3-4.3 = 105 - suitable for large electric machine MHC DV-1 multifunctional cutting oil light yellow oil 6--10 = 140 = 600 for black and non-ferrous metal cutting DV-2 multifunctional cutting oil light yellow oil 18-22 = 170 = 900 for hard metal cutting processing Sintering load (N) SC strong brown thick liquid lubricant cutting more than 160 more than 3920 suitable for heavy cutting processing Q1 precision cutting oil yellow oil 6-10 = 130 = 1960 is suitable for precision cutting, Q2-1 extreme pressure cutting oil deep brown oil 19-25 = 150 = 6076 for extreme pressure cutting Q2-2 extreme pressure cutting oil deep brown oil 80-100 = 180 = 6076 is suitable for tapping and die processing Cutting Q3 activity EP cutting oil light brown oil 30-36 = 1606076 for stainless steel and alloy steel Q7 high speed Aluminum Alloy cutting oil deep brown oil 8-13 = 168 = 1960 for Aluminum Alloy, high-speed machining Q6 extreme pressure grinding grinding oil deep brown oil 8-12 = 150 = 2940 for carbon steel, stainless steel, alloy steel 2 、 water soluble cutting fluid category (by ISO) product name and code name, appearance, pH value, maximum no bite load (N), use, concentration, use and characteristics MAA Q13 metal processing rust preventive emulsified oil, brown transparent liquid 7.5-8.5 - 3-5%, applicable to black and non-ferrous metal vehicles, grinding, drilling MAD DJ high speed band saw cutting liquid brown liquid 8-9 was greater than 600 10-15% is suitable for high speed cutting saw MAF WR-1 microemulsion brown liquid 8-9 = 7