建筑术语总则小汇(国外英文).docVIP

建筑术语总则小汇(国外英文资料) DOC documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. 1 general provisions 1.01 for the standardization of industrial and civil engineering area calculation, unified calculation method, the formulation of this specification. 1.02 this specification applies to the calculation of the size of newly built, expanded or converted industrial and civil construction projects. 1.03, the construction area should be calculated in accordance with scientific and rational principles. 1.04 the construction area shall be calculated in accordance with the present regulations, and shall conform to the relevant standards and regulations of the state. 2 term 2.01 storey story height the vertical distance between two floors or floors and floors. 2.02 natural layer floor floor by floor and floor structure. 2.03 overhead layer empty space building deep foundation or slope building hanging overhead parts without backfill formation of architectural space. 2.04 corridor corridor Gallery horizontal transport space of buildings. 2.05 pick corridors, overhanging, corridor, pick out the horizontal traffic space on the exterior wall of the building. 2.06 eaves corridor eaves Gallery set in the bottom of the building under the eaves of the horizontal transport space. 2.07 corridor cloister, in the buildings, halls, halls, located in the two or more than two layers of back corridor. 2.08 door foyer at the entrance of the building to set up the separation, wind, cold and other architectural transition space. 2.09 building passage passage provides the building space for the road to pass through the building. 2.0.10 an elevated corridor, bridge, way, between buildings and buildings, on two or more floors, specifically for the horizontal traffic setting of the corridor two. External wall and outdoor ground or scattered water contact thickened part of the 2.0.11 plinth building plinth. 2.0.