3.施工部署(外国英语资料).docVIP

3.施工部署 3.1 part of the project construction sequence 3.1.1 Road Engineering (1) subgrade filling construction; (2) the construction order of subbase and subbase 3.1.2 Bridge Engineering (1) bored pile construction; (2) construction of platform (3) column construction; (4) coping construction (5) bridge erection; 3.2 construction flow section division and power arrangement 3.2.1 construction flow section division According to the engineering features of the project, the contents of the project, the construction conditions, and the principle of combining with the production flow to arrange the construction power. The specific flow sections are listed in table 3-1. 3.2.2 construction force arrangement (1) soft foundation treatment; Put in two construction teams, be responsible for the soft foundation treatment of this section. 4 sets of plate inserting machine and 1 diesel Vibrating Sinking machines are arranged, and other machines are matched by the ground engineering department. More than 50 constructors participated. (2) subgrade filling; Three construction teams are put in charge of the subgrade cleaning of the bid section. The construction tasks of Subgrade Earthwork and pulverized coal ash backfill are described. The construction team responsible for the first K22150 ~ K23980 operation period, the length of 1830m, 138 thousand cubic meters of earth. Equipped with self-propelled vibration compaction machine 1, three roller 3 Taiwan, 2 bulldozers, 1 grader, road mixing machine 1 sets, 1 sets of rotary excavator 3. Second in charge of the construction team K23980 ~ K24+446 section and Hutai interchange ramp, the route length of 1819m, 122 thousand cubic meters of earth. Equipped with self-propelled vibratory machine 1, three roller 3 Taiwan, 2 bulldozers, 1 sets of rotary excavator 1. Third construction team is responsible for K25+130 ~ K26+900 operation section, the length of 1770m, earthwork 210 thousand cubic meters. Equipped with self-propelled vibratory machin