Genesis制作资料步骤（国外英文资料）.docVIP

Genesis制作资料步骤 Genesis making data steps One Matrix production Taking the standard 4 board as an example, the attributes of each layer are defined, and each layer is sorted with the CtrlX command according to the order of the board. (Table 1) Drilling board, drill, positive Shape board, rout, positive Element face characters board, silk_screen, positive Element surface solder board, solder_mask, positive Component surface line board signal positive Formation board, power_ground, negative Electrical layer board, power_ground, negative Welding surface line board, signal, positive Solder joint solder board, solder_mask, positive Welding surface characters board, silk_screen, positive 1, the correct arrangement of levels based on the following: The a client provides hierarchical arrangement of order; There is a hierarchy identifier outside the B board; C board has digital symbols such as 1, 2, 3, 4....... 2, the judgment that each layer is positive and negative is based on: The center of the pad is solid, and the center of the pad is hollow. Two Orig production Orig production consists of the following three parts: 1 layers counterpoint Making steps: A selects all layers, taking the drill hole as the reference layer, and using the register function to realize automatic alignment of the line, geoelectric, welding and drilling; B other layers (including character layers) need to be moved manually to make the outer border overlap with the outer borders of the component surface line layer and mirror if necessary. Inspection method: A the center of each pad shall be aligned with the bore center; B outer layers should overlap each other; C element surface character orthography, welding surface characters for the reverse word. 2 line to pad Making steps: A open the Features Histogram of the solder mask, select all in Lines List, press Highlight, compare the line and character to determine whether the pad needs to be transferred; B also select and open the component surface line