操作培训MDS.ppt

Command Line Interface Configuration Access Getting Help in CLI “?” is the key to everything Shows valid ranges, keywords, etc. Getting Help in CLI and Tab Usage Tab character – Use to complete a command Other Convenient Features Other Convenient Features (Cont.) Role-Based Access Control Can set up different roles with different rules for each role. Two pre-defined roles: network-operator – Cannot configure the MDS; has access only to the show commands along with file system commands (dir, copy, etc.) and basic network utilities (ping, etc.) network-admin – Has access to all the CLI commands and can setup 64 permission levels based on user roles and groups Role-Based: Configuration items Creating Users Users configuration attributes username password password expiration role assigned Fibre Channel Interfaces Fiber Channel Interfaces Overview FC Interfaces Trunk Modes FC Interfaces Name and Beacon Interface WWN: Each interface is assigned a unique WWN Interface FCID: In operational Up state, each interface is assigned an FCID In F mode, it is the FCID assigned to the attached N-port In FL mode, it is the Loop Fabric Address (LFA) of the port Interface Beacon: If enabled, the Port LED keeps blinking Does not affect operation of the interface Interface Management Infrastructure Interface Management Services Port Manager FLOGI Manager TL Port Manager SPAN Manager Port Channel Manager VSAN Interface Manager Basic Fibre Channel Interface Configuration FLOGI Enhancement: FC-ID Inter-Op Mode FC-ID consists of domain-area-port. Today, most switch vendors assign one complete area to an N port attached to an F port, thus limiting the maximum number of ports in the switch to be 255. FLOGI Manager intelligently assigns single FC-ID to an N-port attached to an F port in the switch: It provides a command to disable this feature, if required. FLOGI Manager CLI To display the FLOGI Database: Advanced Interface Configurations Configuration of BB-Credit and Max Receive