聚乙烯醇纤维水泥基复合材料受压弹性模量试验研究 - 工业建筑.pdfVIP

聚乙烯醇纤维水泥基复合材料受压弹性模量试验研究 何淅淅 丁鲁波 ( ， 100044) 北京建筑大学土木与交通学院 北京 : 150 mm × 150 mm × 300 mm PVA － 摘 要 采用尺寸为 的棱柱试件对聚乙烯醇纤维水泥基复合材料 ECC 。 ， － 进行轴心受压弹性模量的试验研究 采取连续加载的方式 通过应力 应变曲线获取原点切线模量以 。 ， PVA 及一定应力比下的割线模量 对不同试验标准下的弹性模量取值进行分析对比 研究 纤维体积分数以 。 ，PVA － ECC ， 及材料抗压强度对弹性模量的影响 试验表明 材料的弹性模量随材料抗压强度的提高而提高 且PVA 纤维掺量对水泥基复合材料的弹性模量有一定影响。 :ECC ;PVA ; ; 关键词 纤维 受压弹性模量 抗压强度 DOI :10. 13204 /j． gyjz201609024 EXPEＲIMENTAL STUDY OF COMPＲESSIVE ELASTIC MODULUS OF PVA-ECC He Xixi Ding Lubo (School of Civil and Transportation Engineering ，Beijing University of Civil Engineering and Architecture ， Beijing 100044 ，China) Abstract :Prism specimens (150 mm × 150 mm × 300 mm)of engineered cementitious composites (ECC)were tested for axial compressive elasticity modulus． The way of continuous loading was used for the test and the elastic modulus and secant modulus for the certain stress ratio were got through stress - strain relation． It was studied the influence of polyvinyl alcohol (PVA )fiber volume fraction and compressive strength on elastic modulus through analyzing and comparing the value of elastic modulus in different test specifications． The test results showed that the elastic modulus of PVA － ECC materials was impr