深圳市瑞景光电有限公司 - ic114com.DOC

样 品 承 认 书 SPECIFICATION FOR APPROVAL 客 户 Customer: 品 名 Product Name: 3W绿光 大功率LED 型 号Version number: 3WGH45G 绿光 日 期 Deliver date: 2015-10-22 制造确认Product confirm and sign 工程部 APPROVED BY 制作 Manufacture 审核 APPROVED BY 客户确认Customer confirm and sign 检查 TESTED BY 审核 CHECKED BY 承认 APPROVED BY 确认后请回传,谢谢!Please confirm and fax to us ,thank you! Package Dimensions 平面尺寸图Dimension（mm） Notes 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25mm(0.010) unless otherwise noted. 3. Protruded resin under flange is 1.0mm(0.04) max. 4. Lead spacing is measured where the leads emerge from the package. 5. Specifications are subject to change without notice. ● Spatial Distribution shenzhe xingjingpin opto-electronic CO.,LTD--- RUIJING OPTO Sample acknowledgement book ●Electrical / Optical Characteristics at TA=25℃ Parameter Symbol Min. Typ. Max. Unit Test Condition Luminous Intensity ∮ 160 170 180 Lm IF =70mA Viewing Angle 2θ1/2 -- 140 -- deg IF =700mA DominantWavelength WL 520 523 525 nm IF =700mA Forward Voltage vF 3.0 3.2 3.4 v IF =700mA Reverse Current IR 0 10 uA IF =700mA ●Absolute Maximum Ratings at TA=25℃ Parameter Maximum Rating Power Dissipation 3W Peak Forward Current(1/10 Duty Cycle, 0.1ms Pulse Width) 700mA Continuous Forward Current 850mA Derating Linear From 30℃ 0.07mA/℃ Reverse Voltage 5V Operating Temperature Range -20℃ to + 80℃ Storage Temperature Range -30℃ to + 100℃ Lead Soldering Temperature [1.6mm(.063) From Body] 230℃ for 5 Seconds CAUTION THIS BAG CONTAINS MOISTURE AND ELECTROSTATIC SENSITIVE DEVICES 使用注意事项(1)存为了避免吸潮这批产品储存在干盒(或或者以下环境推荐:贮藏温度:5°C ~ 30°C湿度:60%。(2)产品打开之后的处理SMD产品,LED倾角焊、界面分离可能对光线传动效率,导致发光强度降低。以下的注意:A.打开产品应尽快使用。B.从打开一个包装贮藏温度:5°C ~ 40°C，湿度:30%。(3)处理未使用如果储存超过1个星期或者如果材料,部件应10 ~ 12小时60°C %- p5°C%间。(4)高湿度的储存