研磨处理对竹材表面性质及涂膜附着性之影响effect of sanding .pdf

26 (1) : 114, 2004 1 5 # 120 # 180 # 320 # 400 # 120 # 320 # 120 # 400 # 180 # 320 #180 # 400 NC PU SEM 1803 Research paper Effect of Sanding Treatment on the Surface Properties and Adhesion of Coated Bamboo1 Ssu-Yuan Fan Kun-Tsung Lu Abstract The poor adhesion of films on bamboo was criticized by the bamboo industry. To develop a pretreatment method that improves the adhesion of film and that the bamboo industry becomes motivated to explore potential applications, and subsequently increase the economic value of bamboo products, a study of sanding treatments was examined. Five years-old moso bamboo [Phyllostachys pubescens (Carr.) A. and C. Riv.], and ma bamboo (Dendrocalamus latiflorus Munro), nitrocellulose lacquer and waterborne polyurethane coating were used in the study. Sanding treatments including single stage process i.e. #120, #180, #320, and #400 sanding cloth and two-stage process such as #120#320, #120#400, #180 #320, and #180#400 were applied respectively. Surface properties of bamboo such as roughness, 1.92 2. Graduate student, Assistant Professor (Corresponding Author) , Department of Forestry, NCHU. 2