SATWE使用说明（SATWE use instructions）.doc

SATWE使用说明（SATWE use instructions） SATWE use instructions, SATWE before handling relevant instructions Parameter supplementary definition More should be added, high-rise structure analysis of parameters, a total of nine, they are: general information, prescribed by ritual law information, earthquake information, live load, adjusting information, reinforcement, design information basement and masonry structure information, for a project, in the first time you start SATWE main menu, the program will automatically assign all of the above parameters (commonly used in most engineering value as the underlying values), and to be written to disk, called SAT_DEF. PM file, after restart SATWE, application reads the SAT_DEF automatically. The information in the SAT, after each change these parameters, the program is saved automatically, to ensure the correctness of these parameters in the later use. In the process of structural analysis and design, may change the parameters, often within the supplement parameter definition menu after changing parameters, dont have to repeat generate SATWE data and data check menu, can be directly or reinforcement design calculation, structure analysis in SATWE structure analysis or reinforcement design calculation, directly read SAT_DEF. PM related parameters in the file. The color of special components Beam: beam is divided into ordinary beams, beams, beams, beams and rigid beams, in which dark blue is a normal beam, bright blue is not a beam, bright yellow is a connecting beam, and bright red is a rigid beam. There are three cases of the beam side constraints, such as fresh, hinged and sliding support, with a small red dot in the hinged support end and a small white dot in the sliding support end. Column, column was divided into regular column, pillar, Angle and top articulated frame column, column bottom hinge, both ends hinged column, which is suitable for ordinary column dark yellow, dark purple as the frame pillar, bright purple as the A