信号控制电梯功能（Signal control elevator function）.doc

信号控制电梯功能（Signal control elevator function） The first signal control elevator function description preface Because at present, the elevator has mostly USES the microcomputer network control system, serial communication, intelligent management, such as frequency control of motor speed technology makes the reliability of the elevator and comfort is greatly increased, the traditional relay control system has quit the stage of history. So many elevator peers are very strange to the relay control system. In fact, the control logic of the elevator evolved from the relay control system. Especially the friends want to know about the application and programming of PLC, because the PLC ladder diagram structure and the relay circuit diagrams are very similar, and we contact with the elevator control system, how many there are relay loop, so people as an elevator maintenance technicians, it is necessary for us to relay control system has some understanding. Now we take the XH (signal control) elevator as an example to familiarize ourselves with the principle of the relay control elevator. Signal control elevator function description The system is operated by a driver. The control box in the car is equipped with the instructions button of the corresponding number of stations. A summoning box is installed outside the gates. There is only one upward call button at the bottom. The top floor also has a downward direction call button. The middle tier is equipped with two buttons for upward and downward calls. When someone outside the hall needs to take an elevator, press the button up or down according to the destination request, and the call signal is registered. At the same time, the inside of the cage has a call request and a buzzer. According to the call request, the driver will press the corresponding layer station instruction button. The layer commands are registered and displayed. The elevator control system automatically determines the direction of operation according to the p