汽车的扭矩和档位的关系（The relationship between the torque and the gear of the car）.doc

汽车的扭矩和档位的关系（The relationship between the torque and the gear of the car） Decomposition open should be the relationship between the transmission and engine speed control, the left foot control of clutch when cut influence transmission speed has been declining, because the transmission loss of driving force from the engine body inertia driven by the tyres and the gears. The right foot control of the gas pedal is actually controlling the engine speed. It is necessary to explain the driving route of the car. Mixture explosion in the engine driving the piston downward, convert the up and down movement of the piston to the crankshaft with the crankshaft circular motion of the crankshaft to the circular motion output to the fly wheel, flying between the wheel and the pressure plate is clutch disc, clutch plate center is a transmission shaft (input shaft), that is fly wheel pressure plate sandwiched in between the clutch plate and the transmission of power to the transmission, step on the clutch separate fly wheel and pressure plate no longer grip the clutch plate and the gearbox from the engine power output. A shaft enters the gearbox and passes through a number of gear wheels to the second axis (output shaft), and the second axis passes to the differential, which passes through the differential and semi-axle to the tire. When the clutch is cut, the bodys inertia pushes the vehicle to continue, although it is also slowing down because of its high quality. If the crankshaft end does not continue to feed, the low speed of inertia will decrease faster. A good shift operation is to keep the crankshaft at the end of the crankshaft at the end of the gear box at the end of the gear box. Understand that these two points can be used to achieve a better gear shift operation according to the need to release the speed and accelerator depth through the clutch pedal, and improve the comfort and reduce the wear of the clutch. The simplest and most effective shift operation is the quick