考虑不对称故障的机电暂态–电磁暂态混合仿真方法.PDF

第 30 卷 第 13 期 中 国 电 机 工 程 学 报 Vol.30 No.13 May 5, 2010 8 2010 年 5 月 5 日 Proceedings of the CSEE ©2010 Chin.Soc.for Elec.Eng. 文章编号：0258-8013 (2010) 13-0008-08 中图分类号：TM 74 文献标志码：A 学科分类号：470·40 考虑不对称故障的 机电暂态– 电磁暂态混合仿真方法 刘文焯，侯俊贤，汤涌，宋新立，万磊，范圣韬 ( 中国电力科学研究院，北京市 海淀区 100192) Electromechanical Transient/Electromagnetic Transient Hybrid Simulation Method Considering Asymmetric Faults LIU Wen-zhuo, HOU Jun-xian, TANG Yong, SONG Xin-li, WAN Lei, FAN Sheng-tao (China Electric Power Research Institute, Haidian District, Beijing 100192, China) ABSTRACT: An effective solution of electromechanical 诺顿等值 transient and electromagnetic transient hybrid simulation was 0 引言 proposed, including interface selection, mutual equivalence methods between electromechanical transient and electro- 电磁暂态仿真与机电暂态仿真进行接口混合 magnetic transient network. It is able to deal with the situation 仿真的需求是从直流输电研究开始的。机电暂态程 that the positive and negative sequence parameters of equiva- 序描述直流换流站和直流线路时通常采用准稳态 lence circuit are different. Least square method was adopted to 模型，其假设条件为：1）换流器母线的三相交流 obtain three-sequence fundamental frequency current which 电压是对称、平衡的正弦波；2 ）换流器本身的运 indicated the influence of electromagnetic transiet simulation on 行是完全对称平衡的；3 ）直流电流和直流电压都 the electromechanical network. The solution is demonstrated 是平直的；4 ）换流变压器不考虑饱和，忽略激磁 effective and feasible through several cases. Problems in hybrid 电流。 simulation are solved when various faults (including symmetric 直流准稳态模