3D左右格式（3D left and right format）.docVIP

3D左右格式（3D left and right format） Around 3D The left and right formats are just one way of storing the stereoscopic, unrelated to shooting. If the format is left and right, the films screen width is unchanged and the length is 1/2. If it is in the upper and lower format, play the body, the film length of the screen is unchanged, the width of the original 1/2. The right and left format of the source suitable for any 3D playback equipment: 1, with the ordinary display can be transferred to the computer, with Stereoscopicplayer in red and blue format output, and then with red and blue glasses, red and blue glasses generally 2 yuan a pair, have the effect, but the sharpness of the poor. 2, television can be played in accordance with the television mode, such as polarization TV to play in polarization mode, with polarized glasses to watch, generally a pair of glasses hundred yuan, the screen no flicker, but the resolution only 1080 X 540, clarity has decreased. If the shutter TV is active shutter mode playback, require the display 120HZ above the refresh rate, the left and right eye pictures appear in turn, glasses closed frequency and refresh rate is the same, so the left eye to see the left eye image, right eye to see the right eye image. Because the refresh rate is high, it seems to be at the same time to see the picture of the left and right eye, the brain to form a complete stereo image, need to watch with the shutter glasses, a pair of glasses 1000 yuan, and watch when there is a sense of flicker, but high definition, 1920 X 1080p Full HD. 3D Imaging Technology Technical classification 3D display technology can be divided into glasses and open-hole two categories. Open-hole 3D is mainly used for public business occasions, It will also be applied to portable devices such as mobile phones in the future. 　　In the field of household consumption, whether it is a monitor, projector or television, now it is necessary to match the use of 3D glasses. Do you know what the mai