聚乙烯丙（Polyethylene c）.docVIP

聚乙烯丙（Polyethylene c） Basement waterproof rolling material construction scheme Compilation basis: 1. Waterproof construction manual of construction engineering and technical specification for underground waterproofing engineering gb50108-2001; Standard for quality acceptance of waterproof engineering in the ground. GB50208-2002; And other related specifications and procedures involved in the design and construction process. 2. The existing technical level, construction management level and mechanical equipment capability of my unit. I. project overview: In the basement of this project, the waterproof and waterproof concrete in the basement is waterproof, and the waterproof layer is made of polyethylene polypropylene roller composite waterproof layer. Compilation basis: Design drawings. 2. Construction organization design. 3. 88JZ9, GFZ polyethylene polypropylene coil composite waterproof atlas. 4. GB 18173.1-2006 polymer waterproof material. 5. 88j6-1 waterproof atlas of underground works. 2. Material selection: 1. Polyethylene propylene 300g waterproof rolling material, gb18173-1-2006 waterproof rolling materials. Auxiliary materials: special glue, cement. 3, material-in second-round exam: with the same manufacturer of a unified brand, unified grade product, more than 1000 volumes of five volumes, 100-499, volume 4, smoke 2 (under 100 volume, size and appearance quality inspection, for a second interview coil to coil to remove from the outer volume after the first 300 ㎜ along the longitudinal cut all take 1500 ㎜ coil 2 pieces, can rational test with a piece of crops, another piece. Set aside. 4. When the material comes into play, it should be placed in an indoor setting to avoid rain. Iii. Requirements on the grass-roots level: Waterproof construction base should be solid and smooth, smooth and clean, can not have crisp, sand, crack, up and pointed, potholes, empty drums and so on. Iv. Construction requirements of waterproof main and auxiliary materials: 1. Glue rat