常用D类功放IC（Common D class amplifier IC）.docVIP

常用D类功放IC（Common D class amplifier IC） Common D class amplifier IC Digital amplifiers (also known as ding class amplifiers) are audio power amplifiers that amplify audio signals using switch technology. The amplifier was introduced in the 1970s, but the climate was not formed at the time because of the sound quality. After more than two decades, with the development of electronic technology and components manufacturing process, peoples awareness of environmental protection has been enhanced and digital amplifiers have reemerged. Due to the digital amplifier power amplifier stage work in switching state, amplifier has a small, lightweight, high efficiency, large output power, calorific value is small, and many other advantages, has become a main development trend of audio power amplifier. To meet this trend, many semiconductor manufacturers in the world have developed special integrated circuits for different USES for digital amplifiers. Containing butyl including only the output level of integrated circuit, PWM analog signal input processor (driving integrated circuit), digital signal input of the PWM processor (driving integrated circuit), and will drive circuit and the output stage all integrated on a chip monolithic fully integrated circuits, in order to meet the constitute the needs of a variety of different USES digital amplifier. Different integrated circuits should be selected according to their use. (1) make a headphone amplifier Considering the low power required for the headset, the power supply voltage need not be overused, just less than 5V. In order to reduce the size of the amplifier, all circuits should be integrated into a single chip integrated circuit. For example, choose NJU8721, NJU8725, TI companys TPA2000D4 produced by new Japan wireless company. (2) production of power amplifiers that drive small loudspeakers This kind of situation can choose the output power in 1W ~ 10W single piece full set into circuit. These integrated circuits include yda1