魔方还原教程（Magic square restore tutorial）.docVIP

魔方还原教程（Magic square restore tutorial） Rubiks cube restoration tutorial. TXT insane lunatic is not terrible, terrible is the mental normal crazy! The cube enters the first layer of tutorial (superdetail) Lets take a brief look at the structure of the rubiks cube. Rubiks cube is by There are 26 blocks, and we divide them into three categories: those with three colors The corner block, at eight corners of the rubiks cube, On the rubiks cube, 8; There are two colored blocks of edge, between the corner block and the center block, 12. The only one color is the center block, which is at the center of each face, A total of 6. Red, blue and white Orange, green, yellow, The cube cannot be moved from one block to another, and the corner block cannot be moved to the position of the edges or center blocks, and the edges cannot be moved to the position of the corner block or center block, as well as the center block. In addition, the No two blocks have the same color in 26 blocks, each of which is different. What we call the reduction of six surfaces is actually a reduction There are 26 blocks, and the scientific reduction methods are all To restore the block as a unit, to restore the entire rubiks cube by layer, instead of the reduction of the one we normally say. We divide the rubik cube into three layers, this tutorial is a layer of restoration, and finally restore the entire rubiks cube. Among them, the reduction of the first layer involves four blocks and four edges, which requires one One piece of reduction, lets start with Four edges start and then go back The first layer can be completed by 4 corners. . ... The first step: cross (restore 4 edges) (1) (1) first, we chose the yellow center block As a base surface. will 4 I have a yellow edge To the side of the yellow center. This step is very simple, if You can do it directly, so skip this step; If you cant do it, its ok to look at the steps below, bold Go ahead, restore The rubiks road thus departed: The basic steps are as