常用的塑胶材料简称（Commonly used plastic material for short）.docVIP

下载本文档

17
0
约7.49千字
约 9页
2017-07-21 发布于河南
举报
版权申诉

常用的塑胶材料简称（Commonly used plastic material for short）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

常用的塑胶材料简称（Commonly used plastic material for short）

常用的塑胶材料简称（Commonly used plastic material for short） 1. The fluidity of thermoplastic plastic is divided into three types: liquid, such as polyethylene, polypropylene, polystyrene and cellulose acetate; Medium, such AS modified polystyrene, ABS, AS, organic glass, polyformaldehyde, chlorinated polyether and so on; Illiquidity, such as polycarbonate, hard polyvinyl chloride, polyphenyl ether, alum, fluorine plastic, etc. 2. The mold cavity wall and bottom plate thickness calculation: plastic mold cavity by the melt in the molding process of high pressure function, should have sufficient strength and rigidity, if cavity wall and bottom plate thickness is too small, may be due to insufficient strength and plastic deformation and destruction; It is also possible that the flexural deformation caused by the lack of rigidity can lead to overflows and the emergence of flying edges, reducing the size precision of the plastic parts and affecting the smooth removal of the mold. Therefore, should through the strength and rigidity calculation to determine the cavity wall thickness, especially for important require high precision or large mould cavity, more cant simply by experience to determine the thickness of cavity wall and bottom plate. The calculation of the wall thickness of mold cavity shall be subject to maximum pressure. However, the maximum pressure is that the melt fills the cavity in the moment of injection. As the plastic cools and the gate is frozen, the pressure in the cavity gradually decreases, which is close to normal pressure when opening the mold. The theoretical analysis and production practice show that the large size of mold cavity, the stiffness is not the main contradiction, the wall thickness of the cavity should be subject to the stiffness condition; For the small size of the mold cavity, in the event of large elastic deformation, the internal stress is often more than the allowable stress of die material, insufficient strength is the main contradiction