CAD计算建筑面积（CAD calculation of floor area）.docVIP

CAD计算建筑面积（CAD calculation of floor area） Query method toolbar for measuring area in CAD: Tools menu: query area command line: Area Specify the first corner point, [object (O) / add (A) / minus (S)]: specify the point (1) or enter the option First corner Calculates the area and perimeter defined by the specified point. All points must be on a plane parallel to the XY plane of the current user coordinate system (UCS). Specify the next corner or press the ENTER key to select the specified point: (2) Continue specifying the point, define the polygon, and then press ENTER to complete the perimeter definition. If the polygon is not closed, AutoCAD will draw a line from the last point to the first point when calculating the area. Calculate the perimeter, AutoCAD plus the closed line length. object Calculates the area and perimeter of the selected object. The area of a circle, ellipse, spline, polyline, polygon, plane, domain and entity can be calculated. Note that the two-dimensional entity (created using the SOLID command) does not report the area. Select object: If you choose an open polyline, the AutoCAD calculates the area by assuming that a line is drawn from the last point to the first point. However, calculating the perimeter, AutoCAD ignore this line. When calculating the area and perimeter (or length), the center line of the wide section of lines will be used. Add to When you open the add mode, you should always maintain the total area balance when you continue to define the new domain. The Add option calculates the area and perimeter of each defined region and object, and also calculates the total area of all the defined regions and objects. You can subtract the specified area from the total area by using the subtract option. Specify the first corner point, [object (O) / minus (S)]: specify the point (1), or enter the first corner of the option Calculates the area and perimeter defined by the specified point. All points must be on a plane parallel to the XY plane